- INTERSEAL offers extensive customisation possibilities to make hydraulic manifolds fit into every single project or machine.
- In addition to extensive customisation possibilities for hydraulic manifolds, INTERSEAL also offers the option of having these hydraulic manifolds comply with the specifications required by international certifying bodies. The manifolds can also be supplied with such certification.
INTERSEAL offers extensive customisation possibilities to make hydraulic power packs fit into every single project or machine.
CL canvas rubber sealNBR nitrile rubber with natural cotton Hardness: 90 ºSh
CNV collar, Nitrile collar with asymmetrical lips. NBR nitrile rubber hardness: 80º Sh A
CP collar, Polyurethane collar with symmetrical lips Application: for rods and pistons.
CPN polyurethane collar, Polyurethane collar with symmetrical lips Application: for rods and pistons with energising spring.
CPV polyurethane collar, Polyurethane collar with asymmetrical lips for rod application.
CPV2 double-lip collar, Polyurethane double-lip locking collar for rods
CPVA ring collar, Polyurethane double-lip locking collar For rods with anti-extrusion ring
VP angle joint packing, NBR nitrile rubber V-angle joint packing with natural cotton.
ISV single-acting seal, Single-acting rod seal FILLED PTFE + NBR OR FKM
ISVD double-acting seal, Double-acting rotary rod seal FILLED PTFE + NBR OR FKM
ISVR double-acting seal. Double-acting rotary rod seal FILLED PTFE + NBR OR FKM
CPE piston collar, Polyurethane collar for single-acting asymmetrical lip piston.
CPEA piston collar, Polyurethane collar for single-acting asymmetrical lip piston with anti-extrusion ring.
CPEG piston collar, Polyurethane collar for single-acting asymmetrical lip piston and guide
ISP piston seal, Double-acting PTFE seal for static or semi-dynamic applications FILLED PTFE + NBR OR FKM
ISPS piston seal, Single-acting PTFE seal for static or semi-dynamic applications FILLED PTFE + NBR OR FKM
ISPR piston seal, PTFE rotary piston seal FILLED PTFE + NBR OR FKM
ISPQ piston seal, Three-part double-acting piston seal, FILLED PTFE + NBR OR FKM
PDG piston seal, Five-element double-acting piston seal with guide ring.
PDL piston seal, Three-element double-acting piston seal, rubber canvas with guide ring
PDP piston seal, Double-acting polyurethane piston seal Hardness: 97 Shore
PDTG piston seal , Double-acting piston seal Polytetrafluoroethylene PTFE + Bronze.
PDPC piston seal, Double-acting piston seal, Polyurethane 97 Sh+NBR
RGM rubber wiper, NBR 90 Sh rubber wiper for steel rod with metal core.
RP1 rod wiper, Rod wiper with external sealing lip. Polyurethane. 93 Shores
RPM rod wiper, Rod wiper with metallic steel exterior. Polyurethane. 93 Shores
SAC rod wiper, SAC rod wiper with external sealing lip. Polyurethane. 93 Shores
GER piston guide, Cut piston guide ring. Acetal resin with glass fibre
GRF piston rod guide, Rod guide ring and cut piston. Phenolic resin with natural cotton
GR piston rod guide, Rod guide ring and cut piston. Acetal resin with glass fibre.
Bonded seal seals, Bonded seal seals, NBR, FKM, in steel and stainless steel.
OP double-acting seal, Double-acting seal for rod and piston. Polyurethane Hardness: 93 Shore
PFS static seal, Static seal for SAE polyurethane fastener Hardness: 93 Shore A
O-rings, O-rings, NBR 70/90 Sh. -30ºC+ 110ºC, Silicone MQ -60ºC + 230ºC, Viton FKM -20ºC + 200ºC.
Q-ring seal, Four-lip square seal, Nitrile rubber NBR Hardness: 70 Shore
FIMBU bushing, Filled PTFE base, sintered CuSn8 bronze coating, low-carbon steel support.
FIMBX bushing, Low-carbon support with porous and sintered sliding coating, which is in turn impregnated with a resin-acetal coating.
FINBW-BRM bushing, The bearings of the BRM-10 series are made entirely of CuSn8 bronze.
VA, VA profile Standard design. Available in the widest range of materials and measurements (from Ø9.5 up to Ø2.020 mm).
VS, VS profile The lip is exactly the same as in the VA, but the housing is more robust. As standard as the previous one, but in a smaller measurement range (up to Ø210 mm.)
VL, VL profile Geometrically similar design to the VA but with reduced cross-section for small housings. Manufactured in a single section ranging from Ø135 up to Ø410 mm.
RB, The design of the RB seal is based on many years of experience in this type of applications, NBR OR FKM.